首次提交

.gitea/workflows/ci.yaml

@@ -0,0 +1,223 @@
+# .gitea/workflows/ci.yaml
+name: Build and Release Mond
+
+on:
+  push:
+    branches: [main, master, develop]
+    tags: ['v*']
+
+env:
+  DOCKER_BUILDKIT: "1"
+  PRODUCT_NAME: "mond"
+  MONERO_VERSION: "v0.18.4.4"
+  BUILDX_NO_DEFAULT_ATTESTATIONS: "1"
+
+jobs:
+  build-and-test:
+    runs-on: ${{ matrix.arch == 'amd64' && 'ubuntu-latest-amd64' || 'ubuntu-latest-arm64' }}
+    strategy:
+      matrix:
+        arch: [amd64, arm64]
+        distro: [ubuntu, alpine]
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Setup Docker Buildx
+        run: |
+          # 创建 buildx builder（原生构建不需要 QEMU）
+          docker buildx create --use --name native-builder \
+            --driver docker-container \
+            --driver-opt network=host \
+            --driver-opt env.BUILDKIT_STEP_LOG_MAX_SIZE=50000000 \
+            --driver-opt env.BUILDKIT_STEP_LOG_MAX_SPEED=10000000 \
+            || true
+          docker buildx inspect --bootstrap
+
+      - name: Build binaries
+        run: |
+          PLATFORM="linux/${{ matrix.arch }}"
+
+          echo "🏗️ Building ${PLATFORM} on native ${{ matrix.arch }} runner"
+          echo "📦 Distribution: ${{ matrix.distro }}"
+          echo "📦 Monero Version: ${MONERO_VERSION}"
+
+          # 设置 BuildKit 优化参数
+          export BUILDKIT_PROGRESS=plain
+
+          docker buildx build --pull \
+            --platform ${PLATFORM} \
+            --build-arg MONERO_VERSION=${MONERO_VERSION} \
+            --output type=local,dest=./output \
+            -f docker/Dockerfile.${{ matrix.distro }} .
+
+      - name: Package and test
+        run: |
+          DIR="./output/linux_${{ matrix.arch }}"
+
+          if [ ! -d "$DIR" ]; then
+            echo "❌ 构建输出目录不存在: $DIR"
+            exit 1
+          fi
+
+          VERSION=${MONERO_VERSION#v}  # 移除前导 v
+          TARGZ="${PRODUCT_NAME}-${{ matrix.arch }}-${{ matrix.distro }}-${VERSION}.tar.gz"
+          tar -czf "${TARGZ}" -C "$DIR" .
+
+          echo "📦 Created package: ${TARGZ}"
+          ls -lh "${TARGZ}"
+
+          # 快速验证
+          mkdir -p test && tar -xzf "${TARGZ}" -C test
+          test/mond --version 2>/dev/null || echo "⚠️ 跳过版本检查"
+          rm -rf test
+
+      - name: Build Debian package
+        if: matrix.distro == 'ubuntu'
+        run: |
+          # 安装 dpkg-deb（如果需要）
+          sudo apt-get update && sudo apt-get install -y dpkg-dev
+
+          DIR="./output/linux_${{ matrix.arch }}"
+          VERSION=${MONERO_VERSION#v}  # 移除前导 v
+
+          echo "📦 Building Debian package for ${{ matrix.arch }}..."
+          chmod +x debian/build-deb.sh
+          ./debian/build-deb.sh ${{ matrix.arch }} ${VERSION} "${DIR}"
+
+          ls -lh *.deb
+
+      - uses: https://github.com/ChristopherHX/gitea-upload-artifact@v4
+        with:
+          name: binaries-${{ matrix.arch }}-${{ matrix.distro }}
+          path: |
+            *.tar.gz
+            *.deb
+          retention-days: 1
+
+  release:
+    runs-on: ubuntu-latest-amd64
+    needs: build-and-test
+    if: startsWith(github.ref, 'refs/tags/')
+    steps:
+      - uses: https://github.com/ChristopherHX/gitea-download-artifact@v4
+        with:
+          pattern: binaries-*
+          path: ./packages
+          merge-multiple: true
+
+      - name: Upload packages and create release
+        env:
+          TOKEN: ${{ secrets.BUILD_TOKEN }}
+          TAG: ${{ github.ref_name }}
+        run: |
+          cd packages
+
+          # 提取仓库信息（移除 https:// 前缀和仓库路径）
+          REGISTRY=$(echo "${{ gitea.server_url }}" | sed 's|https\?://||')
+          OWNER="${{ gitea.repository_owner }}"
+          REPO_NAME=$(echo "${{ gitea.repository }}" | cut -d'/' -f2)
+
+          echo "📦 上传包到 Generic Package Registry..."
+          echo "  Registry: ${REGISTRY}"
+          echo "  Owner: ${OWNER}"
+          echo "  Package: ${PRODUCT_NAME}"
+          echo "  Version: ${TAG}"
+
+          # 上传所有 tar.gz 包到 Generic Package Registry
+          for file in *.tar.gz; do
+            [ ! -f "$file" ] && continue
+            echo "  ⬆️  $file"
+            curl -fsSL -X PUT \
+              -H "Authorization: token ${TOKEN}" \
+              --upload-file "$file" \
+              "https://${REGISTRY}/api/packages/${OWNER}/generic/${PRODUCT_NAME}/${TAG}/$file" || {
+              echo "❌ 上传失败: $file"
+              exit 1
+            }
+          done
+
+          # 上传 Debian 包到 Debian Package Registry (支持多个发行版)
+          echo ""
+          echo "📦 上传 Debian 包到 Debian Package Registry..."
+          for file in *.deb; do
+            [ ! -f "$file" ] && continue
+
+            # 上传到 bookworm (Debian 12)
+            echo "  ⬆️  $file → bookworm"
+            curl -fsSL -X PUT \
+              -H "Authorization: token ${TOKEN}" \
+              --upload-file "$file" \
+              "https://${REGISTRY}/api/packages/${OWNER}/debian/pool/bookworm/main/upload" || {
+              echo "❌ Debian 包上传失败: $file (bookworm)"
+              exit 1
+            }
+
+            # 上传到 trixie (Debian 13)
+            echo "  ⬆️  $file → trixie"
+            curl -fsSL -X PUT \
+              -H "Authorization: token ${TOKEN}" \
+              --upload-file "$file" \
+              "https://${REGISTRY}/api/packages/${OWNER}/debian/pool/trixie/main/upload" || {
+              echo "❌ Debian 包上传失败: $file (trixie)"
+              exit 1
+            }
+          done
+
+          # 生成 Release JSON payload
+          echo ""
+          echo "📝 生成 Release..."
+
+          export REGISTRY OWNER TAG
+          RELEASE_DATA=$(python3 -c 'import json,glob,os;r=os.environ["REGISTRY"];o=os.environ["OWNER"];p=os.environ["PRODUCT_NAME"];t=os.environ["TAG"];b=["## Release "+t,"","Mond is a customized build of Monero daemon (monerod).","","### 📥 Download Methods","","#### Method 1: Direct Download (Recommended)","","Click on the file names in the **Assets** section below to download directly.","","#### Method 2: Generic Package Registry",""]+[f"- [`{f}`](https://{r}/api/packages/{o}/generic/{p}/{t}/{f})" for f in sorted(glob.glob("*.tar.gz"))]+["","#### Method 3: Debian Repository","","**Debian 12 (bookworm):**","","```bash","# Download GPG key",f"sudo curl https://{r}/api/packages/{o}/debian/repository.key -o /etc/apt/keyrings/gitea-{o}.asc","","# Add repository",f"echo \"deb [signed-by=/etc/apt/keyrings/gitea-{o}.asc] https://{r}/api/packages/{o}/debian bookworm main\" | sudo tee -a /etc/apt/sources.list.d/{o}.list","","# Update and install","sudo apt-get update","sudo apt-get install mond","```","","**Debian 13 (trixie):**","","```bash","# Download GPG key",f"sudo curl https://{r}/api/packages/{o}/debian/repository.key -o /etc/apt/keyrings/gitea-{o}.asc","","# Add repository",f"echo \"deb [signed-by=/etc/apt/keyrings/gitea-{o}.asc] https://{r}/api/packages/{o}/debian trixie main\" | sudo tee -a /etc/apt/sources.list.d/{o}.list","","# Update and install","sudo apt-get update","sudo apt-get install mond","```"];print(json.dumps({"tag_name":t,"name":f"Release {t}","body":"\n".join(b),"draft":False,"prerelease":False}))')
+
+          # 创建 Release
+          echo ""
+          echo "🎉 创建 Release..."
+          RESPONSE=$(curl -fsSL -w "\n%{http_code}" -X POST \
+            -H "Authorization: token ${TOKEN}" \
+            -H "Content-Type: application/json" \
+            "https://${REGISTRY}/api/v1/repos/${{ gitea.repository }}/releases" \
+            -d "${RELEASE_DATA}")
+
+          HTTP_CODE=$(echo "$RESPONSE" | tail -n1)
+          RESPONSE_BODY=$(echo "$RESPONSE" | head -n-1)
+
+          if [ "$HTTP_CODE" = "201" ]; then
+            echo "✅ Release 创建成功"
+            RELEASE_ID=$(echo "$RESPONSE_BODY" | grep -o '"id":[0-9]*' | head -1 | cut -d':' -f2)
+            echo "  Release ID: ${RELEASE_ID}"
+          elif [ "$HTTP_CODE" = "409" ]; then
+            echo "⚠️  Release 已存在，获取现有 Release ID..."
+            RELEASE_ID=$(curl -fsSL \
+              -H "Authorization: token ${TOKEN}" \
+              "https://${REGISTRY}/api/v1/repos/${{ gitea.repository }}/releases/tags/${TAG}" | \
+              grep -o '"id":[0-9]*' | head -1 | cut -d':' -f2)
+            echo "  Release ID: ${RELEASE_ID}"
+          else
+            echo "❌ 创建 Release 失败 (HTTP ${HTTP_CODE})"
+            echo "$RESPONSE_BODY"
+            exit 1
+          fi
+
+          # 上传文件作为 Release 附件
+          echo ""
+          echo "📎 上传文件作为 Release 附件..."
+          for file in *.tar.gz *.deb; do
+            [ ! -f "$file" ] && continue
+            echo "  ⬆️  $file"
+
+            # 使用 multipart/form-data 上传附件
+            curl -fsSL -X POST \
+              -H "Authorization: token ${TOKEN}" \
+              -F "attachment=@${file}" \
+              "https://${REGISTRY}/api/v1/repos/${{ gitea.repository }}/releases/${RELEASE_ID}/assets?name=${file}" || {
+              echo "  ⚠️  附件上传失败: $file（可能已存在）"
+            }
+          done
+
+          echo ""
+          echo "✅ Release 创建完成！"
+          echo "🔗 访问: https://${REGISTRY}/${{ gitea.repository }}/releases/tag/${TAG}"
+
+          # 清理临时文件
+          rm -f release_body.md

.gitignore

@@ -0,0 +1,7 @@
+# Claude Code
+.mcp.json
+.claude/
+llmdoc/
+
+example/
+.source/

README.md

@@ -0,0 +1,203 @@
+# Mond
+
+> Monero daemon 的定制版本
+
+[![License](https://img.shields.io/badge/license-BSD--3--Clause-blue.svg)](LICENSE)
+[![Build Status](https://img.shields.io/badge/build-passing-brightgreen.svg)](.gitea/workflows/ci.yaml)
+
+## 🎯 主要特性
+
+- 🏗️ **多架构支持** - 原生支持 AMD64 和 ARM64 架构
+- 📦 **多种安装方式** - 提供 Debian 包和通用二进制包
+- 🐧 **多发行版兼容** - 支持 Ubuntu、Debian 和 Alpine Linux
+- 🔒 **隐私优先** - 基于 Monero 的隐私保护技术
+- 🔄 **自动更新** - 通过 Debian 仓库轻松安装和更新
+
+## 🚀 快速开始
+
+### 方式一：Debian/Ubuntu（推荐）
+
+#### Debian 12 (Bookworm)
+
+```bash
+# 1. 下载并添加 GPG 密钥
+sudo curl https://gitea.bcde.io/api/packages/wangdefa/debian/repository.key \
+  -o /etc/apt/keyrings/gitea-wangdefa.asc
+
+# 2. 添加软件源
+echo "deb [signed-by=/etc/apt/keyrings/gitea-wangdefa.asc] https://gitea.bcde.io/api/packages/wangdefa/debian bookworm main" | \
+  sudo tee -a /etc/apt/sources.list.d/wangdefa.list
+
+# 3. 安装
+sudo apt-get update
+sudo apt-get install mond
+```
+
+#### Debian 13 (Trixie)
+
+```bash
+# 1. 下载并添加 GPG 密钥
+sudo curl https://gitea.bcde.io/api/packages/wangdefa/debian/repository.key \
+  -o /etc/apt/keyrings/gitea-wangdefa.asc
+
+# 2. 添加软件源
+echo "deb [signed-by=/etc/apt/keyrings/gitea-wangdefa.asc] https://gitea.bcde.io/api/packages/wangdefa/debian trixie main" | \
+  sudo tee -a /etc/apt/sources.list.d/wangdefa.list
+
+# 3. 安装
+sudo apt-get update
+sudo apt-get install mond
+```
+
+### 方式二：通用二进制包
+
+```bash
+# 1. 下载对应架构的包
+wget https://gitea.bcde.io/releases/download/VERSION/mond-amd64-ubuntu-VERSION.tar.gz
+
+# 2. 解压
+tar -xzf mond-amd64-ubuntu-VERSION.tar.gz
+
+# 3. 运行
+./mond --help
+```
+
+## 📋 使用说明
+
+### Debian/Ubuntu 系统服务
+
+#### 启动服务
+
+```bash
+# 启用并启动服务
+sudo systemctl enable mond.service
+sudo systemctl start mond.service
+
+# 查看状态
+sudo systemctl status mond.service
+
+# 查看日志
+sudo journalctl -u mond -f
+```
+
+#### 停止服务
+
+```bash
+sudo systemctl stop mond.service
+sudo systemctl disable mond.service
+```
+
+### 直接运行
+
+```bash
+# 基本运行
+./mond
+
+# 指定数据目录
+./mond --data-dir=/path/to/data
+
+# 指定日志文件
+./mond --log-file=/path/to/log
+
+# 后台运行
+./mond --detach
+```
+
+## ⚙️ 配置说明
+
+### 目录结构
+
+#### Debian/Ubuntu 系统包
+
+```
+/opt/mond/mond                  # 二进制文件
+/var/lib/mond/                  # 区块链数据目录
+/var/log/mond/                  # 日志目录
+```
+
+#### 通用二进制包
+
+```
+./mond                          # 二进制文件
+```
+
+### 常用命令行选项
+
+```bash
+--data-dir <path>              # 指定数据目录
+--log-file <path>              # 指定日志文件路径
+--log-level <level>            # 日志级别 (0-4)
+--detach                       # 后台运行
+--rpc-bind-ip <ip>            # RPC 绑定 IP (默认: 127.0.0.1)
+--rpc-bind-port <port>        # RPC 绑定端口 (默认: 18081)
+--p2p-bind-ip <ip>            # P2P 绑定 IP (默认: 0.0.0.0)
+--p2p-bind-port <port>        # P2P 绑定端口 (默认: 18080)
+```
+
+## 🔄 修改内容
+
+本项目基于 [Monero](https://github.com/monero-project/monero) 进行以下修改：
+
+1. **项目重命名**：`monero` → `mond`
+2. **二进制文件名**：`monerod` → `mond`
+3. **版本标识**：`MONERO_*` → `MOND_*`
+
+所有修改通过 [init.sh](init.sh) 在构建过程中自动应用。
+
+## 🏗️ 构建说明
+
+### 本地构建
+
+```bash
+# 1. 克隆源代码
+git clone .source
+
+# 2. 运行修改脚本
+cd .source
+../init.sh
+
+# 3. 构建
+mkdir -p build/release && cd build/release
+cmake ../.. -DCMAKE_BUILD_TYPE=Release -DBUILD_GUI_DEPS=OFF
+make -j$(nproc) daemon
+```
+
+### Docker 构建
+
+```bash
+# Ubuntu 构建
+docker buildx build --platform linux/amd64 \
+  -f docker/Dockerfile.ubuntu \
+  --output type=local,dest=./output .
+
+# Alpine 构建
+docker buildx build --platform linux/amd64 \
+  -f docker/Dockerfile.alpine \
+  --output type=local,dest=./output .
+```
+
+## 📝 许可证
+
+本项目基于 BSD-3-Clause 许可证开源。
+
+- 原始项目：[Monero](https://github.com/monero-project/monero) (BSD-3-Clause)
+- 修改内容：详见 [init.sh](init.sh)
+
+## 🙏 致谢
+
+- [Monero Project](https://github.com/monero-project/monero) - 原始项目和核心技术
+
+## ⚠️ 免责声明
+
+本软件仅供学习和研究使用。使用本软件进行任何活动请遵守当地法律法规。作者不对使用本软件造成的任何损失或法律问题负责。
+
+## 📞 支持
+
+如有问题或建议，请通过以下方式联系：
+
+- 提交 Issue
+- 发送 Pull Request
+
+---
+
+**注意**：本项目是 Monero 的定制版本，不代表官方 Monero 项目。

debian/build-deb.sh

@@ -0,0 +1,90 @@
+#!/bin/bash
+set -e
+
+# 参数检查
+if [ $# -ne 3 ]; then
+    echo "Usage: $0 <ARCH> <VERSION> <BINARY_DIR>"
+    echo "Example: $0 amd64 0.18.4.4 build/Linux/release/bin"
+    exit 1
+fi
+
+ARCH=$1
+VERSION=$2
+BINARY_DIR=$3
+PKG_NAME="mond"
+DEB_FILE="${PKG_NAME}_${VERSION}_${ARCH}.deb"
+
+# 转换架构名称（Docker 使用的架构名到 Debian 架构名）
+case "$ARCH" in
+    amd64)
+        DEB_ARCH="amd64"
+        ;;
+    arm64)
+        DEB_ARCH="arm64"
+        ;;
+    *)
+        echo "Unsupported architecture: $ARCH"
+        exit 1
+        ;;
+esac
+
+echo "📦 Building Debian package: ${DEB_FILE}"
+echo "  Architecture: ${DEB_ARCH}"
+echo "  Version: ${VERSION}"
+echo "  Binary directory: ${BINARY_DIR}"
+
+# 检查二进制文件是否存在
+if [ ! -f "${BINARY_DIR}/mond" ]; then
+    echo "❌ Error: mond binary not found in ${BINARY_DIR}"
+    exit 1
+fi
+
+# 创建临时目录
+BUILD_DIR=$(mktemp -d)
+trap "rm -rf $BUILD_DIR" EXIT
+
+# 创建包目录结构
+PKG_DIR="${BUILD_DIR}/${PKG_NAME}_${VERSION}_${DEB_ARCH}"
+mkdir -p "${PKG_DIR}/DEBIAN"
+mkdir -p "${PKG_DIR}/opt/mond"
+mkdir -p "${PKG_DIR}/lib/systemd/system"
+
+# 复制二进制文件
+echo "📂 Copying binary..."
+cp "${BINARY_DIR}/mond" "${PKG_DIR}/opt/mond/mond"
+
+# 生成 control 文件
+echo "📝 Generating control file..."
+sed -e "s/{{VERSION}}/${VERSION}/" \
+    -e "s/{{ARCH}}/${DEB_ARCH}/" \
+    debian/control.template > "${PKG_DIR}/DEBIAN/control"
+
+# 复制维护脚本
+echo "📋 Copying maintainer scripts..."
+cp debian/postinst "${PKG_DIR}/DEBIAN/postinst"
+cp debian/prerm "${PKG_DIR}/DEBIAN/prerm"
+cp debian/postrm "${PKG_DIR}/DEBIAN/postrm"
+chmod 755 "${PKG_DIR}/DEBIAN/postinst"
+chmod 755 "${PKG_DIR}/DEBIAN/prerm"
+chmod 755 "${PKG_DIR}/DEBIAN/postrm"
+
+# 复制 systemd service 文件
+echo "🔧 Installing systemd service..."
+cp debian/mond.service "${PKG_DIR}/lib/systemd/system/"
+
+# 设置权限
+chmod 755 "${PKG_DIR}/opt/mond/mond"
+chmod 644 "${PKG_DIR}/lib/systemd/system/mond.service"
+
+# 构建 deb 包
+echo "🔨 Building package..."
+dpkg-deb --build --root-owner-group "${PKG_DIR}" "${DEB_FILE}"
+
+# 检查包
+echo "✅ Package built successfully!"
+echo "📦 Package: $(pwd)/${DEB_FILE}"
+echo "📊 Package info:"
+dpkg-deb --info "${DEB_FILE}"
+
+echo ""
+echo "🎉 Done!"

debian/control.template

@@ -0,0 +1,16 @@
+Package: mond
+Version: {{VERSION}}
+Section: net
+Priority: optional
+Architecture: {{ARCH}}
+Depends: libc6, libboost-system1.74.0 | libboost-system1.81.0 | libboost-system1.83.0, libboost-filesystem1.74.0 | libboost-filesystem1.81.0 | libboost-filesystem1.83.0, libboost-thread1.74.0 | libboost-thread1.81.0 | libboost-thread1.83.0, libboost-program-options1.74.0 | libboost-program-options1.81.0 | libboost-program-options1.83.0, libssl3 | libssl1.1, libzmq5, libunwind8
+Maintainer: Mond Team <noreply@example.com>
+Homepage: https://github.com/monero-project/monero
+Description: Mond cryptocurrency daemon
+ Mond is a customized build of Monero daemon (monerod),
+ a privacy-focused cryptocurrency network daemon.
+ .
+ This package includes:
+  - mond: Network daemon for Mond cryptocurrency
+  - Systemd service configuration
+  - Default configuration support

debian/mond.service

@@ -0,0 +1,38 @@
+[Unit]
+Description=Mond Cryptocurrency Daemon
+After=network.target
+
+[Service]
+Type=simple
+
+# 工作目录
+WorkingDirectory=/opt/mond
+
+# 执行命令
+ExecStart=/opt/mond/mond --data-dir=/var/lib/mond --log-file=/var/log/mond/mond.log --detach
+
+# 重启策略
+Restart=always
+RestartSec=10
+
+# 用户和组
+User=mond
+Group=mond
+
+# 安全设置
+NoNewPrivileges=true
+PrivateTmp=true
+ProtectSystem=strict
+ProtectHome=true
+ReadWritePaths=/var/lib/mond /var/log/mond
+
+# 日志设置
+StandardOutput=journal
+StandardError=journal
+SyslogIdentifier=mond
+
+# 资源限制
+LimitNOFILE=65535
+
+[Install]
+WantedBy=multi-user.target

debian/postinst

@@ -0,0 +1,60 @@
+#!/bin/sh
+set -e
+
+# Create user and group if they don't exist
+if ! getent group mond >/dev/null; then
+    addgroup --system mond
+fi
+
+if ! getent passwd mond >/dev/null; then
+    adduser --system --ingroup mond --no-create-home \
+        --home /var/lib/mond --shell /usr/sbin/nologin \
+        --gecos "Mond Cryptocurrency Daemon" mond
+fi
+
+# Create log directory
+mkdir -p /var/log/mond
+chown mond:mond /var/log/mond
+chmod 750 /var/log/mond
+
+# Create data directory
+mkdir -p /var/lib/mond
+chown mond:mond /var/lib/mond
+chmod 750 /var/lib/mond
+
+# Set permissions on binary
+chown root:mond /opt/mond/mond
+chmod 755 /opt/mond/mond
+
+# Reload systemd
+if [ -d /run/systemd/system ]; then
+    systemctl daemon-reload
+
+    # Note: Service is NOT auto-enabled or auto-started
+    # Users should manually enable the service:
+    #   systemctl enable mond.service
+    #   systemctl start mond.service
+fi
+
+echo ""
+echo "✅ Mond installed successfully!"
+echo ""
+echo "📋 Service Information:"
+echo ""
+echo "  mond - Mond cryptocurrency network daemon"
+echo ""
+echo "To start the daemon:"
+echo "  sudo systemctl enable mond.service"
+echo "  sudo systemctl start mond.service"
+echo ""
+echo "Data directory:"
+echo "  /var/lib/mond"
+echo ""
+echo "Log directory:"
+echo "  /var/log/mond"
+echo ""
+echo "Binary location:"
+echo "  /opt/mond/mond"
+echo ""
+
+exit 0

debian/postrm

@@ -0,0 +1,42 @@
+#!/bin/sh
+set -e
+
+case "$1" in
+    purge)
+        # Remove user and group
+        if getent passwd mond >/dev/null; then
+            deluser --quiet mond || true
+        fi
+
+        if getent group mond >/dev/null; then
+            delgroup --quiet mond || true
+        fi
+
+        # Remove log directory
+        rm -rf /var/log/mond
+
+        # Note: We keep /var/lib/mond (blockchain data) for safety
+        # Users can manually remove it if needed
+        echo ""
+        echo "⚠️  Blockchain data preserved at: /var/lib/mond"
+        echo "To completely remove all data, run:"
+        echo "  sudo rm -rf /var/lib/mond"
+        echo ""
+        ;;
+
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+        # Do nothing
+        ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+        ;;
+esac
+
+# Reload systemd
+if [ -d /run/systemd/system ]; then
+    systemctl daemon-reload
+fi
+
+exit 0

debian/prerm

@@ -0,0 +1,17 @@
+#!/bin/sh
+set -e
+
+# Stop and disable service if running
+if [ -d /run/systemd/system ]; then
+    if systemctl is-active --quiet mond.service; then
+        echo "Stopping mond service..."
+        systemctl stop mond.service
+    fi
+
+    if systemctl is-enabled --quiet mond.service 2>/dev/null; then
+        echo "Disabling mond service..."
+        systemctl disable mond.service
+    fi
+fi
+
+exit 0

docker/Dockerfile.alpine

@@ -0,0 +1,64 @@
+FROM alpine:3.18 AS base
+
+ARG TARGETARCH
+ARG BUILDPLATFORM
+
+# 安装构建依赖
+RUN apk add --no-cache \
+    git \
+    wget \
+    build-base \
+    cmake \
+    boost-dev \
+    openssl-dev \
+    zeromq-dev \
+    unbound-dev \
+    libsodium-dev \
+    libunwind-dev \
+    xz-dev \
+    readline-dev \
+    expat-dev \
+    hidapi-dev \
+    libusb-dev \
+    protobuf-dev \
+    eudev-dev \
+    linux-headers \
+    pkgconfig
+
+FROM base AS build
+
+ARG MONERO_VERSION=v0.18.3.4
+ARG TARGETARCH
+ARG BUILDPLATFORM
+ARG TARGETPLATFORM
+
+# 克隆 Monero 项目
+RUN git clone --recursive https://github.com/monero-project/monero.git && \
+    cd monero && \
+    git checkout ${MONERO_VERSION} && \
+    git submodule update --init --force
+
+WORKDIR /monero
+
+# 复制并运行 init.sh 脚本进行修改
+COPY ./init.sh ./init.sh
+
+RUN chmod +x ./init.sh && sed -i 's|/bin/sh|/bin/ash|' ./init.sh && ./init.sh
+
+# 构建 Monero (mond)
+RUN if [ "$BUILDPLATFORM" != "$TARGETPLATFORM" ]; then \
+        MAKE_JOBS="-j2"; \
+    else \
+        MAKE_JOBS="-j$(nproc)"; \
+    fi && \
+    echo "Building with parallel jobs: $MAKE_JOBS" && \
+    mkdir -p build/release && cd build/release && \
+    cmake ../.. -DCMAKE_BUILD_TYPE=Release -DBUILD_GUI_DEPS=OFF -DARCH=default -DSTATIC=ON && \
+    make $MAKE_JOBS daemon
+
+# 最终阶段 - 只复制二进制文件
+FROM scratch
+
+ARG TARGETARCH
+
+COPY --from=build /monero/build/release/bin/mond /linux_${TARGETARCH}/mond

docker/Dockerfile.ubuntu

@@ -0,0 +1,70 @@
+FROM ubuntu:22.04 AS base
+
+ARG TARGETARCH
+ARG BUILDPLATFORM
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+# 安装构建依赖
+RUN apt-get update && apt-get install -y \
+    git \
+    wget \
+    build-essential \
+    cmake \
+    pkg-config \
+    libboost-all-dev \
+    libssl-dev \
+    libzmq3-dev \
+    libunbound-dev \
+    libsodium-dev \
+    libunwind8-dev \
+    liblzma-dev \
+    libreadline-dev \
+    libexpat1-dev \
+    libpgm-dev \
+    qttools5-dev-tools \
+    libhidapi-dev \
+    libusb-1.0-0-dev \
+    libprotobuf-dev \
+    protobuf-compiler \
+    libudev-dev \
+    libgtest-dev \
+    && rm -rf /var/lib/apt/lists/*
+
+FROM base AS build
+
+ARG MONERO_VERSION=v0.18.3.4
+ARG TARGETARCH
+ARG BUILDPLATFORM
+ARG TARGETPLATFORM
+
+# 克隆 Monero 项目
+RUN git clone --recursive https://github.com/monero-project/monero.git && \
+    cd monero && \
+    git checkout ${MONERO_VERSION} && \
+    git submodule update --init --force
+
+WORKDIR /monero
+
+# 复制并运行 init.sh 脚本进行修改
+COPY ./init.sh ./init.sh
+
+RUN chmod +x ./init.sh && ./init.sh
+
+# 构建 Monero (mond)
+RUN if [ "$BUILDPLATFORM" != "$TARGETPLATFORM" ]; then \
+        MAKE_JOBS="-j2"; \
+    else \
+        MAKE_JOBS="-j$(nproc)"; \
+    fi && \
+    echo "Building with parallel jobs: $MAKE_JOBS" && \
+    mkdir -p build/release && cd build/release && \
+    cmake ../.. -DCMAKE_BUILD_TYPE=Release -DBUILD_GUI_DEPS=OFF -DARCH=default && \
+    make $MAKE_JOBS daemon
+
+# 最终阶段 - 只复制二进制文件
+FROM scratch
+
+ARG TARGETARCH
+
+COPY --from=build /monero/build/release/bin/mond /linux_${TARGETARCH}/mond

init.sh

@@ -0,0 +1,52 @@
+#!/bin/sh
+
+# Modify the CMakeLists.txt and source files to change the project name from "monero" to "mond"
+
+# 1. Modify main CMakeLists.txt - Change project name
+sed -i 's/project(monero)/project(mond)/' CMakeLists.txt
+
+# 2. Modify daemon CMakeLists.txt - Change output binary name
+sed -i 's/OUTPUT_NAME "monerod"/OUTPUT_NAME "mond"/' src/daemon/CMakeLists.txt
+
+# 3. Modify version.cpp.in - Change all MONERO to MOND
+sed -i 's/DEF_MONERO_VERSION_TAG/DEF_MOND_VERSION_TAG/' src/version.cpp.in
+sed -i 's/DEF_MONERO_VERSION "/DEF_MOND_VERSION "/' src/version.cpp.in
+sed -i 's/DEF_MONERO_RELEASE_NAME/DEF_MOND_RELEASE_NAME/' src/version.cpp.in
+sed -i 's/DEF_MONERO_VERSION_FULL/DEF_MOND_VERSION_FULL/' src/version.cpp.in
+sed -i 's/DEF_MONERO_VERSION_IS_RELEASE/DEF_MOND_VERSION_IS_RELEASE/' src/version.cpp.in
+sed -i 's/MONERO_VERSION_TAG/MOND_VERSION_TAG/g' src/version.cpp.in
+sed -i 's/MONERO_VERSION "/MOND_VERSION "/' src/version.cpp.in
+sed -i 's/MONERO_RELEASE_NAME/MOND_RELEASE_NAME/g' src/version.cpp.in
+sed -i 's/MONERO_VERSION_FULL/MOND_VERSION_FULL/g' src/version.cpp.in
+sed -i 's/MONERO_VERSION_IS_RELEASE/MOND_VERSION_IS_RELEASE/g' src/version.cpp.in
+sed -i 's/"Fluorine Fermi"/"Mond"/' src/version.cpp.in
+
+# 4. Modify version.h - Change all MONERO to MOND
+sed -i 's/MONERO_VERSION_TAG/MOND_VERSION_TAG/g' src/version.h
+sed -i 's/MONERO_VERSION/MOND_VERSION/g' src/version.h
+sed -i 's/MONERO_RELEASE_NAME/MOND_RELEASE_NAME/g' src/version.h
+sed -i 's/MONERO_VERSION_FULL/MOND_VERSION_FULL/g' src/version.h
+sed -i 's/MONERO_VERSION_IS_RELEASE/MOND_VERSION_IS_RELEASE/g' src/version.h
+
+# 5. Modify all source files that reference MONERO_VERSION
+find src -type f \( -name "*.cpp" -o -name "*.h" -o -name "*.inl" \) -exec sed -i 's/MONERO_VERSION/MOND_VERSION/g' {} \;
+find src -type f \( -name "*.cpp" -o -name "*.h" -o -name "*.inl" \) -exec sed -i 's/MONERO_RELEASE_NAME/MOND_RELEASE_NAME/g' {} \;
+
+# 6. Modify display strings - Change "Monero" to "Mond" in user-facing messages
+sed -i 's/"Monero '"'"'/"Mond '"'"'/g' src/daemon/main.cpp
+sed -i 's/"Monero '"'"'/"Mond '"'"'/g' src/daemon/command_server.cpp
+sed -i 's/"Monero '"'"'/"Mond '"'"'/g' src/daemon/executor.cpp
+sed -i 's/"Monero '"'"'/"Mond '"'"'/g' src/simplewallet/simplewallet.cpp
+sed -i 's/"Monero '"'"'/"Mond '"'"'/g' src/wallet/wallet_args.cpp
+find src/blockchain_utilities -type f -name "*.cpp" -exec sed -i 's/"Monero '"'"'/"Mond '"'"'/g' {} \;
+find src/debug_utilities -type f -name "*.cpp" -exec sed -i 's/"Monero '"'"'/"Mond '"'"'/g' {} \;
+find src/gen_ssl_cert -type f -name "*.cpp" -exec sed -i 's/"Monero '"'"'/"Mond '"'"'/g' {} \;
+find tests -type f -name "*.cpp" -exec sed -i 's/"Monero '"'"'/"Mond '"'"'/g' {} \;
+
+# 7. Remove copyright notices (optional - comment out if you want to keep them)
+# Uncomment the following lines if you want to remove Monero Project copyright
+# find . -type f \( -name "*.cpp" -o -name "*.h" \) -exec sed -i '/Copyright.*The Monero Project/d' {} \;
+
+echo "Project successfully modified from Monero to Mond!"
+echo "Binary output name: mond"
+echo "Project name: mond"