feat: 优化配置文件格式并完善文档系统

- 新增详细配置示例文件（conf/params.example.conf），包含所有配置项的详细中文说明
- 配置文件采用清晰的章节分组和双语注释（英文标题 + 中文说明）
- 新增配置项：sync-pruned-blocks、limit-rate-up、limit-rate-down
- 默认启用 P2P 网络绑定（0.0.0.0:18080）
- 更新项目文档索引并同步配置参考文档

debian/postinst

@@ -30,45 +30,91 @@ if [ ! -f /var/lib/mond/params.conf ]; then
 # Edit this file to customize your Mond daemon settings
 # After modifying, restart the service: sudo systemctl restart mond.service
 
-# Data directory - where blockchain data is stored
+# DATA STORAGE
+# ============================================================================
+# data-dir: 区块链数据存储目录
 data-dir=/var/lib/mond/data
 
-# Blockchain pruning - reduces disk usage by pruning old blockchain data
+# BLOCKCHAIN PRUNING
+# ============================================================================
+# prune-blockchain: 启用区块链修剪模式
 prune-blockchain=1
 
-# ZMQ pub socket for notifications
-zmq-pub=tcp://127.0.0.1:18083
+# sync-pruned-blocks: 同步已修剪的区块（默认启用）
+sync-pruned-blocks=1
 
-# Network peer settings
+# NETWORK PEER SETTINGS
+# ============================================================================
+# out-peers: 主动连接的对等节点数量（出站连接）
 out-peers=32
+
+# in-peers: 接受连接的对等节点数量（入站连接）
 in-peers=64
 
-# Priority nodes - trusted nodes to connect to
+# limit-rate-up: 上传速率限制（kB/s）
+limit-rate-up=1048576
+
+# limit-rate-down: 下载速率限制（kB/s）
+limit-rate-down=1048576
+
+# PRIORITY NODES
+# ============================================================================
+# add-priority-node: 优先连接的可信节点
 add-priority-node=p2pmd.xmrvsbeast.com:18080
 add-priority-node=nodes.hashvault.pro:18080
 
-# DNS checkpointing and blocklist
+# SECURITY AND NETWORK INTEGRITY
+# ============================================================================
+# enforce-dns-checkpointing: 强制执行 DNS 检查点验证
 enforce-dns-checkpointing=1
+
+# enable-dns-blocklist: 启用 DNS 黑名单
 enable-dns-blocklist=1
 
-# P2P and RPC bind settings
-#p2p-bind-ip=0.0.0.0
-#p2p-bind-port=18080
+# ZMQ NOTIFICATION SYSTEM
+# ============================================================================
+# zmq-pub: ZeroMQ 发布接口，用于实时广播区块链事件
+zmq-pub=tcp://127.0.0.1:18083
+
+# P2P AND RPC NETWORK BINDING
+# ============================================================================
+# p2p-bind-ip: P2P 网络监听地址（默认启用，绑定所有网络接口）
+p2p-bind-ip=0.0.0.0
+
+# p2p-bind-port: P2P 网络监听端口
+p2p-bind-port=18080
+
+# rpc-bind-ip: RPC 接口监听地址
 #rpc-bind-ip=0.0.0.0
+
+# rpc-bind-port: RPC 接口监听端口
 #rpc-bind-port=18081
+
+# confirm-external-bind: 确认外部网络绑定
 #confirm-external-bind=1
 
-# RPC login credentials
+# RPC AUTHENTICATION
+# ============================================================================
+# rpc-login: RPC 访问认证凭据
 #rpc-login=user:password
 
-# Enable SSL for RPC connections
-#rpc-ssl=1
+# RPC SSL/TLS ENCRYPTION
+# ============================================================================
+# rpc-ssl: 启用 RPC 连接的 SSL/TLS 加密（语义更清晰的启用方式）
+#rpc-ssl=enabled
+
+# rpc-ssl-certificate: SSL 证书文件路径
 #rpc-ssl-certificate=/path/to/your/certificate.pem
+
+# rpc-ssl-private-key: SSL 私钥文件路径
 #rpc-ssl-private-key=/path/to/your/private_key.pem
 
-# Logging settings
-# Log levels: 0=minimal, 1=errors, 2=warnings, 3=info, 4=debug
-log-level=3
+# LOGGING SETTINGS
+# ============================================================================
+# log-level: 日志详细程度（调整为详细日志级别）
+log-level=1
+
+# log-file: 日志文件保存路径
 log-file=/var/log/mond/mond.log
 EOF
     chown mond:mond /var/lib/mond/params.conf